Accenting with Ribbon is as Easy as 1 - 2 - 3!
|
 |
| 1. |
With the announcement and name card design toward you, thread each end of the ribbon through the prepunched holes leaving the ends trailing on the back side of the announcement. |
|
 |
| 2. |
Thread the RIGHT end of the ribbon back through the LEFT hole so the end is again on the front of the announcement. |
|
 |
| 3. |
Thread the LEFT end of the ribbon back through the RIGHT hole so the end is again in front of the announcement. Pull both ends so the ribbon is tight and your ribbon is complete! |
|
|
Tying a Classic Bow
|
|
| 1. |
Cross left end of ribbon over right and tie together.
|
| 2. |
Form a loop with right end of ribbon.
|
| 3. |
Bring left end of ribbon from behind to front of right loop and pull through, being careful not to twist ribbon.
|
| 4. |
Gently pull the loops tight, then pull apart slightly to adjust lengths of loops and tails.
|
| 5. |
When completed, puff out top center knot for a finishing touch. |
|
|
Creative Ideas for Completing Ribbon Ends
|
 |
|
